.063 light weight corrosion resistance 3003 5052 Tread Bright
diamond raised pattern aluminum checker plate sheet coils
Aluminum checker plate is also called aluminum chequered plate. It
is made from aluminum sheet. One side of the surface is embossed
with diamond plate pattern. The different pattern can fit different
environments and various usage. Aluminum checker plate is better
for antirust and lighter than other materials, it can be used for
many years and can retain high value after being replaced. This
type of checkered plate is widely used as antiskid plate in both
commercial and industrial flooring needs and also used in the
vehicles, such as the ambulance and the firework truck
Aluminum Tread Bright (3003-H22) is a sheet product with a raised
diamond pattern and a bright shiny finish for decorative and
non-skid applications. It is commonly used on ambulances, fire
trucks, trailers and toolboxes for a bright decorative finish that
is easily cleaned.
Tread Bright Aluminum features a raised diamond pattern to provide
overall traction. Lightweight with a polished and textured finish,
it exhibits good corrosion resistance and is easily workable. It is
commonly used for no-slip walkways, ornamental projects, truck bed
liners, and wall or floor panels
At RuiYi alumininum metal, we offer four grades of aluminum in
various raw material forms - including coil, sheet, custom-sized
blanks, angle, channel, and flat bar profiles. Each shipment is
accompanied by certificates of compliance and complete test
documentation.
Features & Characteristics of Aluminum & Aluminum Alloys
- 3003 H14 Aluminum is alloyed with 1.2% manganese to improve the strength of
commercially pure aluminum. The H14 temper has been strain hardened
and partially annealed. As a good general purpose aluminum, it
offers excellent corrosion resistance, workability, and
weldability. It has many uses including decorative trim, vehicle
components, cooking utensils, and roofing and siding.
- 5052 H32 grade aluminum's major alloying element is magnesium, which makes
it much stronger than 3003 series. In addition to superior
weldability and good formability, it provides excellent corrosion
resistance, especially in salt water and marine environments.
Anodized coatings take on a bright and clear appearance. It is also
an excellent choice for applications that require strength and
formability at a reasonable cost.
- 6061 T6 Aluminum has magnesium and silicon as its major alloys. Its high
strength-to-weight ratio makes it suitable for large parts that
need to be very light. Exhibiting good workability and high
resistance to corrosion, it is easily welded by a skilled
technician but welds may require re-hardening. This alloy is widely
used for aircraft, marine, appliance, and mechanical system
components where improved strength, high corrosion resistance, and
light weight characteristics are desirable
Specification
Material: High grade aluminum sheet.
Finish: Mill and polish.
Thickness: 0.1", 0.63", 0.125", 0.188", 0.250", 0.45", 0.5".
Panel size: Max. 4' × 10' (usually is 1' × 1', 1' × 2', 1' × 4', 1'
× 8', 2' × 2', 2' × 4', 2' × 8', 4' × 4', 4' × 8', 4' × 10')
Color: Siver, black, yellow, red.
Alloy: 1000 series, 3000 series, 5000 series, 6000 series, 8000
series.
Temper: O, H22, H24, H26, H32, H34.
Aluminum stair tread sheet, Aluminum tread Brite plate,Aluminum
checker plate manufacturers, Perforated aluminum sheet
china,Diamond sheet manufacturers, Aluminum tread plate
manufacturers
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
Diamond aluminium tread plate or floor plate is widely used for a
variety of structural, architectural and cosmetic applications. A
method has been developed to roll metal plates with an upraised
"lug" pattern, providing the customer with several choices to best
meet the needs of the project, with specific qualities of
cleanability, impact resistance, support strength, and corrosion
resistance
Bright Tread Plate(3003) is defined by its offset diamond shaped
alternating single bar pattern. Common applications include ramps,
toolboxes, decorative flooring or walls, vehicle running boards or
kick plates, trailers, dock surfaces, and stairways.
