5083 5086 H111 Marine grade aluminum plate sheet for shipyard boat
deck
5083 aluminum plate is a high-magnesium alloy with good strength in
non-heat treatable alloy, good corrosion resistance and
machinability
The surface of 5083 aluminum plate is anodized and the surface is
beautiful. The arc welding performance is good. The main alloying
element in the 5083 alloy is magnesium, which has good corrosion
resistance and weldability, as well as moderate strength. Excellent
corrosion resistance makes the 5083 alloy widely used in marine
applications such as ships, as well as in automobiles, aircraft
welding parts, subway light rails, pressure vessels that require
strict fire protection (such as liquid tankers, refrigerated
trucks, refrigerated containers), refrigeration units, TV towers,
Drilling equipment, transportation equipment, missile parts, armor,
etc.
5083 belongs to the Al-Mg alloy and is used in a wide range of
applications. Especially in the construction industry, it is the
most promising alloy. Good corrosion resistance, excellent
weldability, good cold workability and medium strength. The main
alloying element of 5083 is magnesium, which has good forming and
processing properties, corrosion resistance, weldability and medium
strength. It is used in the manufacture of aircraft fuel tanks, oil
pipes, and sheet metal parts for transportation vehicles and ships,
instruments, street lamp brackets and rivets. Hardware, electrical
enclosures, etc. 3 AL-Mg alloy is the most widely used rust-proof
aluminum. This alloy has high strength, especially fatigue
resistance: high plasticity and corrosion resistance, no heat
treatment strengthening, and semi-cold hardening. Good plasticity,
low plasticity during cold work hardening, good corrosion
resistance, good weldability, poor machinability and polishing.
Uses are mainly used for low load parts requiring high plasticity
and good weldability in liquid or gaseous media, such as fuel
tanks, gasoline or lube oil conduits, various liquid containers and
other small load parts made with deep drawing: Wire is used to make
rivets
Grade 5052 is an excellent marine grade for when formability is
required. If strength is more of a concern, grade 5083 is a good
alternative. 6061-T6 is an all-around popular grade of aluminum
that is also commonly used in marineapplications. It has very good
corrosion resistance and is precipitation hardened
Marine grade aluminum plate are applied in processing large boats,
yachts and other ships,and dnv approved aluminum
plate 5083 is professional anti-rust aluminum plate. Compared with other
industries, marine industry pay more attention to safety and
quality in many aspects. Therefore, marine grade aluminum plates
with excellent performance can be applied to more ship factories.
Through the alloy composition determination, casting process
optimization, homogenization heat treatment and rolling process
test, the product performance of aluminum plate 5083 H116 is
usually applied
The DNV certificate has been regrade as the quality ensurance for
marine industry, only passed the DNV certificate, the aluminum
plate 5083 for the ship factory can meet the requirements of the
users, especially the increase of the processing demand for the
complex parts such as the aluminum plate for the ship, the rail
transit, the automobile and the mold, so the application prospect
is very broad. The whole ship body can be made of aluminum alloy
material, with strong anti-aging ability, and has been further
improved in corrosion resistance through continuous research and
design, so from the long-term choice, marine aluminum alloy
material belongs to the best choice.
Selection of dnv approved aluminum plate 5083 has light weight,
strength, corrosion resistance, good weldability and many other
advantages. Aluminium alloy has higher strength than steel, but it
is more light in the weight, which will save oil, aluminium alloy
still can solve the problem of rust, still can save on maintenance
cost.
Aluminum metal supply the 5 best Marine Grade aluminum plate sheet
available
5052 marine grade
aluminum plate This alloy is remarkably resistant to seawater corrosion. Its
medium to high strength alloy make-up allow for good cold
formability and exceptional weldability. Magnesium is the major
alloying element for 5052. In the marine industry, it is the
primary material for boat hulls and cargo tanks.
5083 aluminum plate
Of all non-heat treatable alloys, this has the highest strength.
5083 is resistant to stress, cracking and exfoliation attack under
in marine corrosive conditions. It has a low density and excellent
thermal conductivity. It is used across many industries, but
primarily shipbuilding.
5083 aluminum sheet is used to manufacture pressure vessels and
tanks, truck components, marineequipment and components, and
cryogenic applications
5086 aluminum sheet
This alloy shows great results when welded, retaining most of its
strength. This factor, along with its corrosion resistance in
seawater make it a very popular material choice for the marine
industry. 5086 is used extensively for hulls and vessel gangways.
5086 aluminum sheet belongs to 5000 series alloy and is one of the
key products of 5000 series aluminum plate. The main alloying
elements of 5086 aluminum alloy are magnesium and silicon. The
products have high corrosion resistance, good weld-ability and
medium strength. 5086 aluminum can be used in the manufacture of
sheet metal, metallurgy, and electrical enclosures for
transportation vehicles and ships. Compared with other aluminum
products, the anti-corrosion property of 5086 aluminum is an
important reason for its wide application. Therefore, 5086 aluminum
sheet plate has also become “rust-proof aluminum plate”.
Aluminum-magnesium alloys and aluminum-manganese alloys are
collectively referred to as rust-proof aluminum because the alloy
components in between have their anti-corrosion properties
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
XIAOXIAN RUIYI Can manufacture aluminum alloy plate sheet as
Alloy: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061
6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
Aluminium plate | aluminum alloy sheet | Aluminum tread plates |
Aluminum coils | Aluminum Foils| Aluminium diamond plate sheet |
Aluminum checker plates | Aluminium chequer plate sheet
