DNV BV Certified Marine grade 5083 aluminium plate alloy sheet for
shipping building use
Aluminium Alloy Plates are medium strength alloy plates with exceptional corrosion
resistance. Aluminum sheet plates are created by surpassing
aluminum between rolls underneath pressure, it becomes thinnerand
longer in the moving direction.
5083 aluminium alloy plate is an aluminium alloy with magnesium and traces of manganese and
chromium. It is highly resistant to attack by seawater and
industrial chemicals. Alloy 5083 retains exceptional strength after
welding
Aluminium 5083 alloy sheet is known for exceptional performance in extreme environments. 5083
is highly resistant to attack by both seawater and industrial
chemical environments. Alloy 5083 also retains exceptional strength
after welding. It has the highest strength of the non-heat
treatable alloys but is not recommended for use in temperatures in
excess of 65°C. Applications Alloy 5083 is typically used in: ~
Shipbuilding ~ Rail cars ~ Vehicle bodies ~ Tip truck bodies ~ Mine
skips and cages ~ Pressure vessels Mechanical Properties shown are
for 0/H111 temper
Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the
tempered condition, it is strong, and retains good formability due
to excellent ductility. 5083 has high resistance to corrosion, and
is used in marine applications. It has the low density and
excellent thermal conductivity common to all aluminium alloys.
5083 H116/H321 aluminum sheet is used as marine aluminum sheet.The mechanical properties,
corrosion resistance and welding performance are relatively
superior, mainly for the strake, hull structure of the bending
plate and on the outboard plate
5083-H111 aluminum is 5083 aluminum in the H111 temper. To achieve
this temper, the metal is strain hardened to a strength that is
lower than what is permissible for H11 (1/8-hard).
BS EN 485-2:2008 aluminum Sheet 0.2 - 6.3mm Thick
| Property | Value |
| Proof stress | 125 min Mpa |
| Tensile strength | 275-350 Mpa |
| Hardness Brinell | 75 HB |
| Thermal Expension | 25 x10-6 /K |
We can supply
Alloy: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061
6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
