electrical chemical industries Factory Supply 4 ' X 8 ' Aluminium
alloy plate Sheet 1060
1060 aluminium alloy plate sheet is commonly used in the electrical and chemical industries, on
account of having high electrical conductivity, corrosion
resistance, and workability. It has low mechanical strength
compared to more significantly alloyed metals
alloy:1060
temper:O~H112
width:500mm-1500mm
Length: according to your requirements
1060 Aluminum Sheet Features
This series aluminum sheet, also called pure aluminum sheet, has
the highest aluminum content among all the series produced. Its
aluminum content can be more than 99.00%. the aluminum content of
1060 series aluminum sheet has to reach 99.6% or more.
1060 aluminum sheet characteristics
low density,
good conductivity and thermal performance
good corrosion resistance
good plastic processing performance
1060 aluminum sheet application
1060 aluminum plate alloy sheet can be used in daily necessities, lighting appliance, baffle
plate, adornment, chemical industrial containers, heat sink, signs,
electronics, lamps and lanterns, nameplate, electric equipment,
stamping parts and other products.
Their typical application is the site with high demands of
form-ability and corrosion resistance and not high requirement of
strength.
Alloy available: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083
5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill | Emboss | Diamond | 2bar | 3bars | Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm
RUIYI Aluminum is a professional manufacturer and supplier of 1100
aluminium alloy plate based in China. We also offer aluminum coil,
PVDF aluminium coil, aluminum sheet, coated aluminum coil, diamond
aluminum tread plate,and more. Whenever you have a need for any of
our products, please feel free to contact us.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
