Alloy 3003 is fairly low strength but it can be hardened to a
significant degree by cold working, enabling a series of “H”
tempers. Alloy 3003 is also produced as a bright finish treadplate
(also known as chequer plate) with industrial and decorative
applications
Aluminium Chequered Plates that are free from any sort of
impurities and widely used for resistance to varied temperature and
enhanced durability.
Our clients can avail from us an excellent quality range of
Aluminum Chequered Plate, which are manufactured from high grade
quality raw materials. These Aluminium Chequered Plates can be
customized as per our customers specifications and it can be
availed at industrial leading price.
aluminium chequer plate is ideally suited for use in both interior
and exterior areas subject to frequent, heavy wheeled traffic e.g.
service corridors, loading areas and car parks.
Aluminium chequer plate helps to reduce maintenance costs by
eliminating the need to repair and repaint wall and door surfaces.
The embossed chequer pattern conceals the effects of any surface
damage caused by wheeled traffic.
Aluminum Checkered Plate Popular Specifications:
Popular materials: aluminum checkered plate 1100 3003 5052
alloy: 1060 3003 3105
temper: H14
Plate thickness: 1.0mm-6.0mm
Plate width:900mm-1500mm
Aluminum checkered tread plates:
Alloy: 1100,1060, 3003, 5005 5052
Temper: H14,H18,H24,H32
Plate Thickness (mm): 1.5mm to 6mm
Width (mm): Up to 1500mm
Length (mm): Up to 6000mm
Standard: EN standard ASTM standard
Aluminum checkered tread plate has the following features:
Water-proof;
Truly Slip Resistant;
Durable and Weather Resistant;
Bright Reflective Surface;
Aluminium Checkered Plates with Big/Small five bar Patterns for
Ceiling Tiles and Indoor and Outdoor Decoration, thickness
1.2~6.5MM, Width 914~2000MM and Length 600~6000MM, height of
pattern of 0.8~1.0MM.
Aluminium tread plate coils: used as tread plate or as the stairs,
floor, car hopper etc.
Thickness 1.0mm-8.0mm; Popular size:
1000*2000,1200*2400,1219*2438,1220*2440
1000*3000,1250*3000,1500*3000 etc.
Surface: stucco, two bars, five bars, diamond pattern, mill finish
etc
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
