Wholesale diamond aluminum plate cheap price 5086 Aluminum tread
checkered plate sheets
ASTM: ASTM B632 (Standard Specification for Aluminum-Alloy Rolled
Tread Plate)
Alloy: 5086-H32
Characteristics: Lightweight with a dull mill textured finish.
Raised diamond pattern provides all around traction.
Workability: Excellent candidate for most processing techniques.
Good corrosion resistance.
Applications: Commonly used for safety. Catwalks, Trench covers,
Walkways, also used for Ornamental projects.
ASTM B632 5086-H32 Aluminum Floor Plate
5086 aluminum diamond plate has higher strength than 5052 and 5083
plates. 5086 diamond aluminum plate is particularly resistant to
salt water corrosion. Because 5086 aluminum is not heat treated,
5086 plate is easy to form, stamp and weld. 5086 tread plate is
used for: boat hulls, gangways, ramps, superstructures, shipping
drums, support structures for marine applications.
5086 Aluminum tread checkered plates sheets are very resilient
against aggressive substances and therefore, they regarded as
indestructible. Due to their durability, they are used in many
different areas because they do not lose their shape or look, even
after a long time. Whether industrial floors, airplanes, ships and
vehicles, or stairs indoors or outdoors -5086 aluminium checker
plates are a popular material which is appreciated for its
excellent properties, the high resilience and the low weight. Even
designers use these plates due to their decorative look.
5086 aluminum diamond sheet exhibits has excellent corrosion
resistance, making it common in marine and salt water environments
5086-H32 Aluminum Sheet is frequently found in marine applications,
with higher strength capacity than Aluminum Alloy 5052 or Aluminum
Alloy 5083.
aluminum stair tread sheet, Aluminum tread Brite plate,Aluminum
checker plate manufacturers, Perforated aluminum sheet
china,Diamond sheet manufacturers, Aluminum tread plate
manufacturers
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
