1060 3004 stucco embossed aluminum sheet coils for solar panel
systems
The embossed oxidized panel is beautiful, with thickness from
0.25mm to 2.0mm, while the maximum width is 1250mm, after pattern
embossed, the thickness could be 0.25 to 2.0mm more. Additionally,
we offer processing service for anozdizing aluminum sheet, which
could further strength sheet’s ability of anti-corrosion.
Pattern: Rhombic veins, orange peel veins, diamond veins, five-rib
veins etc.
Stucco Embossed Aluminum Sheet are widely used in refrigerator,
solar heat reflectors, decorative aluminum products, lamps, bags,
disinfection box, air conditioning, ventilation ducts, indoor &
outdoor decoration, machinery and equipment housing and other
industries. Embossed finish can enhance the thickness and strength
of aluminum.
A stucco embossed finish is achieved by processing the natural mill
finish material through embossing rollers. This provides a surface,
which diffuses light reducing reflectivity and glare. It is used
for applications on decorative effects, or to reduce surface
reflectivily. As aluminium is both a stable and durable material,
it provides excellent service as a roofing or cladding without the
need of any protective coating. Aluminiums highly reflective
surface will dull to a uniform patina finish with prolonged
exposure to the sun, wind and rain bome sand and dirt. Changes in
appearance will be consistent along an elevation.
Stucco embossed aluminum with kraft paper
Alloy Aluminum grade 3003, 3004, 3105(antirust), 1050, 1060,
1100(normal)
Temper : H14 ,H16 ,H24 ,H26
Thickness: 0.2-2.0mm
Width: 914 mm, 1000, 1200, 1220mm or as customer's requirement
Length: 2000-30000mm
Aluminium plate | aluminum alloy sheet | Aluminum tread plates |
Aluminum coils | Aluminum Foils| Aluminium diamond plate sheet |
Aluminum checker plates | Aluminium chequer plate sheet
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
