Commercial Grade 5052 aluminum diamond coils plate 4'x8' for
trailer toolbox
Diamond plate , also known as checker plate, tread plate and Durbar floor plate, is a type of metal stock with a regular pattern of raised
diamonds or lines on one side, with the reverse side being
featureless. Diamond plate is usually steel, stainless steel or aluminum.
5052-H32 is optimal for sheet metal work because of its ability to
allow for a tight radius while bending. 5052-H32 contains 2.5%
magnesium. It is one of the highest strength alloys of the non-heat
treatable grades. ... 6061-T6 is the most commonly used aluminum
alloys
5052-H32 Aluminum Sheet is commonly used for the bodies of boats,
buses, trucks, and trailers, as well as for chemical drums. It is
nonmagnetic and not heat treatable
Diamond plate aluminum can be challenging to weld, especially while
keeping its attractive cosmetic appearance. The combination of flat
and raised surfaces has traditionally presented a problem as well.
We can supply stronger, more attractive welds on aluminum diamond
plates at lower cost, with higher strength and quality than is
commercially feasible. We can also help you produce them under our
license if desired. Some advantages of our patented weld process
include:
- High strength, cosmetic welds of aluminum, including diamond plate.
- No limitations for flat vs. raised surface for a high strength
weld.
- Only spot-welding process in the world which can accomplish this.
- Able to inexpensively weld thickness combinations up to 8:1
thickness ration (example from treadplate to truck
sidewall/pillars)
- Particularly useful in truck and trailer applications.
- Able to produce quantities of welded parts in quantities of
millions per year in our facility or licensing for on-site
application.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
RuiYi Metal supplier trade various kinds of alloy grade like
3003,5052,6061,1050,1100 with competitive price and fast delivery
time and our aluminum diamond plate sheet or diamond aluminum coils
is very suitable for stairs steps, interior floor decoration,
anti-slip floor plate, and truck box or carrier.
Below specification of aluminum plate diamond patterns is very
popular in America market
- Thickness 1.25″-16″
- Width 36″-96″
- Length 96″, 120″, 144″, 240″, 288″, 260″
- Diamond tread and 5 bar tread plate
