Marine | Boat usage 5083 H111 H116 H321 aluminium alloy plate 2000
mm x 3000 mm aluminum coil
Alloy 5083 aluminum plates have higher strength than 5052 plate and has exceptional thermal
conductivity. It is especially suited to the cryogenic market
Alloy 5083 aluminum plate retains exceptional strength after being welded. It has the
highest strength of the non-heat treatable alloys, but its performance may be affect in environments
of temperatures above 65°C.
5083 marine aluminium sheet is commonly used in shipbuilding, aircraft, train body etc
Aluminium alloy coil 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the
tempered condition, it is strong, and retains good formability due
to excellent ductility. 5083 has high resistance to corrosion, and
is used in marine applications. It has the low density and
excellent thermal conductivity common to all aluminium alloys.
Typical Applications require a weldable alloy of high to moderate
strength, with good corrosion resistance. Marine applications,
unfired welded pressure vessels, TV towers, drilling rigs,
transportation equipment
Alloy available: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083
5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill | Emboss | Diamond | 2bar | 3bars | Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm
RUIYI Aluminum is a professional manufacturer and supplier of 5083 aluminium alloy plate based in China. We also offer aluminum coil, PVDF aluminium coil,
aluminum sheet, coated aluminum coil, diamond aluminum tread
plate,and more. Whenever you have a need for any of our products,
please feel free to contact us.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
