Mirror finish aluminum stair tread plates diamond sheet 5052 5083
3003 manufacturer
aluminum diamond tread plate are commonly used to build stairs that do not require a concrete
fill and that need an anti-slip surface for safe foot traffic.
Diamond plate stair treads are manufactured from high quality
diamond plate, also known as checker plate
Aluminum plate stair treads are ideal for retrofitting over
existing dangerously slick flooring in applications that require a
lightweight corrosion resistant surface. Non-slip aluminum plate
stair treads are a cost-effective way to create an instantly safe
surface without completely replacing existing flooring.
Aluminum Tread Plate Features:
Light weight transport sector is required, Disassembling,
Convenient assembling,
the best comer of an aluminum alloy step. Increase the
energy-saving effect.
Aluminum Tread Plate for Anti-slip Floor Patterns:
* big 5 bars
* small 5 bars
* diamond
* 3 bar
* pointer etc.
5052 and 5083 Aluminum tread diamond sheets are very resilient
against aggressive substances and therefore, they regarded as
indestructible. Due to their durability, they are used in many
different areas because they do not lose their shape or look, even
after a long time. Whether industrial floors, airplanes, ships and
vehicles, or stairs indoors or outdoors -5052 aluminium diamond
plates are a popular material which is appreciated for its
excellent properties, the high resilience and the low weight. Even
designers use these plates due to their decorative look
Specification of aluminum diamond sheet
| Alloy No. | 1060, 1100, 1200, 3003, 3105, 5005, 5052, 5251, 5754, 5454, 5154,
5083, 5086 6061, 6082 |
| Temper | H114, H224, H12, H14, H16, H18, H32, H34, H36, H38, T4, T6, F |
| Surface | Bright finish, Mill finish |
| Bar Difference | 1 bar (Diamond), 2 bar, 3 bar, 5 bar |
| Available Dimension of aluminum diamond sheet |
| Mill finish Surface | Bright finish Surface |
| Thickness (mm) | 1.00---6.50mm | 1.20---6.50mm |
| Pattern height | Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm | Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm |
| Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm | Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm |
| Sheet Thickness above 2.0mm, bar height: 1.50mm | Sheet Thickness above 2.0mm, bar height: 1.50mm |
| Width (mm) | Maximum 1500mm | Maximum 1650mm |
| Length (mm) | Maximum 6000mm | Maximum 6000mm |
| Paper interleaves | On request for selected | On request for selected |
| Normal size | 1200×2400mm, 1219×2438mm, 1219×3048mm | 1200×2400mm, 1219×2438mm, 1219×3048mm |
Aluminum tread plate, also referred to as aluminum checker plate,
stair plates was first known for it's anti-slip property as tread
plates
Aluminum Tread Plate Applications:
1] Vehicle
Characteristics and benefits: light weight transport sector is required, the best
comer of an aluminum alloy step. Increase the energy-saving effect.
Applications: checker plate floor, such as van-type vehicle catwalk flooring,
wood step of the bus or truck, train inspection hole lid, tank car,
the car cold storage.
2] Ship
Characteristics and benefits: because the excellent corrosion resistance in seawater,
requires no resistance such as repainting. It can be used with
confidence for many years.
Applications: corridor and bridges over the lid and floors, stairs, cabin deck,
fish tank,
gangway to the floating dock.
Characteristics and benefits: corrosion resistance of the step corner has been utilized
shopping and tourist attractions that require aesthetics, such as
collective for many years.
Applications: floors, stairs, shelves, such as gutter lid, the bicycle.
3] Plant
Characteristics and benefits: harmless because it is also suitable for container species,
such as facilities and chemical plants and food plant is excellent
in chemical resistance.
Applications: bench floor and stairs, equipment/ plant machinery, such as
ambulatory inspection.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
