2024 Aerospace components use aluminum sheet good machinability
aircraft aluminum sheet
Alloy 2024 Aluminum plate provides high yield strength and
relatively good fatigue resistance thanks to its aluminum and
copper composition. RuiYi offers 2024 aluminum plate that is ready
for use on structures and parts where good strength-to-weight ratio
is desired.
Alloy 2024 aluminum plate is essential for precision fittings and
parts because of its good machinability and superior grain
structure. It also has good weldability, however, 2024-T351
aluminum plate has less corrosion resistance than other alloys.
The T351 temper means our 2024 plate has been solution heat
treated, cold worked and naturally aged followed by a minimal
stretching to reduce stresses in the material.
Typical specifications are ASTM B209, AMS-QQ-A-250/4 and AMS4037.
All of our aluminum plates can be ground or milled to your exact
specifications with mill reports available. We offer thickness
ranges from 0.125” to 1.500”.
2024 Plate Applications
Below are a few applications that work with 2024 plate:
- Aerospace components
- Aircraft fuselage components
- Wing tension members
- Shear webs and ribs
- Precision fittings
- Automotive parts
- Truck and aircraft wheel parts
- Truck suspension parts
Chemical Composition Limits (WT %)
Silicon: 0.5
Iron: 0.5
Copper: 3.8-4.9
Manganese: 0.3-0.9
Magnesium: 1.2-1.8
Chromium: 0.1
Zinc: 0.25
Titanium: 0.15
Others, each: 0.05
Others, total: 0.15
Balance, Aluminum
Typical Mechanical Properties
Tensile Strength (KSI) 64-57
Yield Strength (KSI) 42-41
Elongation (%) 12-4
XIAOXIAN RUIYI Can manufacture aluminum alloy plate sheet as
Alloy: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061
6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
Aluminium plate | aluminum alloy sheet | Aluminum tread plates |
Aluminum coils | Aluminum Foils| Aluminium diamond plate sheet |
Aluminum checker plates | Aluminium chequer plate sheet
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
