ASTM-B209 Standard 1060 5754 6061 H14 2mm-10mm Diamond Aluminum
Checkered Sheets
Aluminum Checker Plate aslo named as aluminum chequer plate or
aluminum checkered plate.It is easy to fabricate and its raised
diamond ,bar,pointer,lug pattern provides good slip
resistance.Which has good forming, drilling and welding abilities
and widely used in car pedals, antiskid part in station, factory,
etc. Some bright surface products can also be used in architectural
decorations.
| Item | Diamond aluminum tread plates |
| Standard | GB/T 3190-2008 JIS H4040:2006 JIS H4001:2006 ASTM B221M:2006 ASTM
B209M:2006 ISO 209:2007(E) EN 573-3:2003 |
| Alloy | 1060, 3003, 5052, 5754, 6061 ,6063,6082 etc. |
| Temper | H14/H154 ,H24/H254,H26/H274 ,H18/H194 ,H32/H334 etc. |
| Thickness | 0.8-10.0 |
| Width | 100mm -1650mm |
| Length | 500mm -16000mm |
| Checker height | 1.0mm-2.5mm |
| Checker length | 35mm-50mm |
| Pattern | 1. big 5 bar 2. small 5 bar 3. 3 bar 4. diamond 5. pointer |
| Packaging | Our Products are packed and labeled according to the regulations
and customer's requests. Great care is taken to avoid any damage
which might be caused during storage or transportation. In
addition, clear labels are tagged on the outside of the packages
for easy identification of the product I. D. and quality
information. |
Aluminum diamond plate is basically a sheet of aluminum on which a
recurring pattern of raised diamonds is embossed or stamped. Due to
its anti-slip and cosmetically-appealing texture, the plate is
extensively used in dance floors, wall panels, counter tops, floor
mats, and tool boxes. It is also used for the steps and floor bed
of trucks, buses, trailers, and so forth.
Aluminum diamond plates are used to manufacture dance floor, truck
toolboxes, storage containers, running boards, wall panels and so
on since it contains the raised diamond pattern on one side of the
diamond plate.
By creating the raised diamond pattern on the surface of the
aluminum diamond plate, it looks attractive.
Diamond plates are a robust material, which is a made of
lightweight metal aluminum, which it provides brightness. It is
possible to purchase the diamond plates in a pre cut form by
specifying the thickness and size of the diamond plates. Sliced
sheet distributor provides the diamond plate with specified range
of thickness and its size and it is delivered to your doorstep.
Diamond aluminum sheet is a corrosion resistant material and it
does not rust easily since it contains the diamond pattern on its
surface and it is easy to clean.
The maintenance of the aluminum diamond plate is easy when it is
compared with the other forms of metal. These are used for both
practical and decroative applications since the surface of the
diamond plates looks bright and effective in its form of the metal.
Our factory
Workers: more than 2000 experienced workers, and 260 professional
senior engineers;
Certificates: SGS, ISO9001: 2008, CE, FDA etc
Main Equipment: 10 casting & rolling production lines, one (1+4)
hot-rolling production line, 9 cold-rolling mills, 4 foil-rolling
mills, tension levelers, flying shears, annealing furnaces,
one 260m roller coating aluminium sheet processing line, 3
1650/1850 roller coating aluminium coil processing lines, 3
embossing machines, slitting machines, two mirror polishing
machines, etc
Applications of diamond Aluminum Checker Plate:
1. Loading Ramps
2. Stair Tread
3. Flooring
4. Dock Plate
5. Dock Board
6. Decorative purposes
7. Fire Trucks
8. Ambulances
9. Recreational Vehicles
10. Car Rear Bumper Protector
11. Ship deck
12. Autos
13. Workshop floors
14. Building floors and steps
15. Antiskid floor of bus
16. Elevator
17. Stair tread
18. Tread board
19. Vehicle step
20. Amusement park
21. Cabinet facing
22. Ceiling fan
23. Hot rod
24. Wall accent
25. Restaurant service area
26. Table top
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
